Qos Control List Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 4-54: DSCP Translation Parameters
DSCP Maximum number of supported DSCP values is 64. and valid DSCP value ranges from
0 to 63.
Ingress Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS
class and DPL map.
There are two configuration Parameters for DSCP Translation.
1. Translate: DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify: Click to enable Classification at Ingress side.
Egress There are the following configurable Parameters for Egress side.
Remap: Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.

QoS Control List Configuration

This section shows the QoS Control List (QCL), which is made up of the QCEs. Each row describes a
QCE that is defined. The maximum number of QCEs is 256 on each switch. Click on the lowest plus
sign to add a new QCE to the list.
Web GUI: Configuration > QoS > DSCP Translation
Figure 4-59: Quality of Service Control List Configuration
87