FibroLAN Falcon-RX/812/G/A User Manual page 83

Falcon R-Class | User Guide
Table 4-52: QoS Port DSCP Configuration Parameters
Port The Port column shows the list of ports for which you can configure DSCP ingress
and egress settings.
Ingress In Ingress settings you can change ingress translation and classification settings
for individual ports. There are two configuration Parameters available in
Ingress: Translate and Classify.
Translate To Enable the Ingress Translation, click the checkbox.
Classify Classification for a port has 4 different values.
•
•
•
•
Egress Port Egress Rewriting can be one of the following:
•
•
•
83
Disable: No Ingress DSCP Classification.
DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
Selected: Classify only selected DSCP for which classification is enabled as
specified in DSCP Translation window for the specific DSCP.
All: Classify all DSCP.
Disable: No Egress rewrite.
Enable: Rewrite enabled without remapping.
Remap: DSCP from analyzer is remapped and frame is remarked with
remapped DSCP value.