FibroLAN Falcon-RX/812/G/A User Manual page 292

Falcon R-Class | User Guide
Figure 5-33: Rmon History Overview
Table 5-30: Rmon History Overview Parameters
RMON History Overview
History Index
Sample Index
Sample Start
Drop
Octets
Pkts
Broadcast
Multicast
CECErrors
Undersize
Oversize
Frag.
Jabb.
Coll.
Utilization
292
Indicates the index of History control entry.
Indicates the index of. the data entry associated with the control entry.
The value of sysUpTime at the start of the interval over which this sample
was measured.
The total number of events in which packets were dropped by the probe
due to lack of resources.
The total number of octets of data (including those in bad packets)
received on the network.
The total number of packets (including bad packets, broadcast packets,
and multicast packets) received.
The total number of good packets received that were directed to the
broadcast address.
The total number of good packets received that were directed to a
multicast address.
The total number of packets received that had a length (excluding framing
bits but including FCS octets) of between 64 and 1518 octets, inclusive,
but had either a bad Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error).
The total number of packets received that were less than 64 octets.
The total number of packets received that were longer than 1518 octets.
The number of frames which size is less than 64 octets received with
invalid CRC.
The number of frames which size is larger than 64 octets received with
invalid CRC.
The best estimate of the total number of collisions on this Ethernet
segment.
The best estimate of the mean physical layer network utilization on this
interface during this sampling interval, in hundredths of a percent.