FibroLAN Falcon-RX/812/G/A User Manual page 216

Falcon R-Class | User Guide
Synchronization
Collecting
Distributing
Defaulted
Expired
4.17.5.3 Neighbor Status
Web GUI: Monitor > Aggregation > LACP > Neighbor Status
Figure 4-159: LACP Neighbor Status
Table 4-153: LACP Neighbor Status Parameters
Neighbor Status
This page provides a status overview for the LACP neighbor status for all ports. Only ports that
are part of an LACP group are shown. For details on the shown parameters please refer to
IEEE 801.AX-2014.
Port
State
Aggr ID
Partner Key
Partner Port
Partner Port Priority
Activity
Timeout
Aggregation
216
Show whether the system considers this link to be "IN_SYNC";
i.e., it has been allocated to the correct LAG, the group has been
associated with a compatible Aggregator, and the identity of the
LAG is consistent with the System ID and operational Key
information transmitted.
Show if collection of incoming frames on this link is enabled.
Show if distribution of outgoing frames on this link is enabled.
Show if the Actor's Receive machine is using Defaulted
operational Partner information.
Show if that the Actor's Receive machine is in the EXPIRED state.
The switch port number.
The current port state:
•
Down: The port is not active.
•
Active: The port is in active state.
•
Standby: The port is in standby state.
The aggregation group ID which the port is assigned to.
The key assigned to this port by the partner.
The partner port number associated with this link.
The priority assigned to this partner port .
The LACP mode of the group (Active or Passive).
The timeout mode configured for the port (Fast or Slow).
Show whether the system considers this link to be
"aggregateable"; i.e., a potential candidate for aggregation.