FibroLAN Falcon-RX/812/G/A User Manual page 125

Falcon R-Class | User Guide
State
Last Authentication
Buttons
4.8.2.7 ACL Ports Configuration
Configure the ACL Parameters (ACE) of each switch port. These Parameters will affect frames
received on a port unless the frame matches a specific ACE.
Note: For a detailed explanation of ACL and ACE terms, refer to the Glossary of Terms at the end
of this manual
125
The client can either be authenticated or unauthenticated. In the
authenticated state, it is allowed to forward frames on the port, and in
the unauthenticated state, it is blocked. If the backend server has not
successfully authenticated the client, it is unauthenticated.
If an authentication fails for one or the other reason, the client will
remain in the unauthenticated state for Hold Time seconds.
Shows the date and time of the last authentication of the client
(successful as well as unsuccessful).
The port select box determines which port is affected when clicking the
buttons.
Clear: This button is available in the following modes:
•
Force Authorized
•
Force Unauthorized
•
Port-based 802.1X
•
Single 802.1X
Clear All: This button is available in the following modes:
•
Multi 802.1X
•
MAC-based Auth.X
Click to clear the counters for the selected port.
Clear this: This button is available in the following modes:
•
Multi 802.1X
•
MAC-based Auth.X