FibroLAN Falcon-RX/812/G/A User Manual page 61

Falcon R-Class | User Guide
Table 4-33: Group Name to VLAN Mapping Table parameters
Delete
Group Name
VLAN ID
Port Members
Adding a New Group to VLAN mapping entry
Click Add New Entry to add a new entry in the mapping table. An empty row is added to the table
and the Group Name, VLAN ID and port members can be configured as needed. Legal values for a
VLAN ID are 1 through 4095.
The Delete button can be used to undo the addition of new entry. The maximum possible Group
to VLAN mappings is limited to 256.
4.6.6.4 IP Subnet based VLAN Membership Configuration
The IP subnet to VLAN ID mappings can be configured here. This section allows adding, updating, and
deleting IP subnet to VLAN ID mapping entries and assigning them to different ports.
Web GUI: Configuration > VCL > IP Subnet-based VLAN
Figure 4-37: IP Subnet based VLAN Membership Configuration display
61
To delete a Group Name to VLAN mapping, check this box. The
entry will be deleted from the switch during the next Save.
A valid Group Name is a string, at the most 16 characters long,
which consists of a combination of alphabets (a-z or A-Z) and
integers (0-9) with no special characters allowed.
You may either use a Group that already includes one or more
protocols (see Protocol to Group mappings) or create a Group to
VLAN ID mapping that will become active the moment you add one
or more protocols inside that Group.
Furthermore, the Group to VLAN ID mapping is not unique, as long
as the port lists of these mappings are mutually exclusive (e.g.,
Group1 can be mapped to VID 1 on port#1 and to VID 2 on port#2).
Indicates the VLAN ID to which the Group Name will be mapped. A
valid VLAN ID ranges from 1 to 4095
A row of check boxes for each port is displayed for each Group
Name to VLAN ID mapping. To include a port in the mapping, check
the box. To remove or exclude the port from the mapping, make
sure the box is unchecked. By default, no ports are members, and
all boxes are unchecked.