Web Gui - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide

3.3 Web GUI

The Web management is accessed by setting the required IP address in the URL Browser. When
accessing the devices via the Web interface, its initial Port State Overview window is displayed. as
shown below.
Web GUI: Monitor > Ports > State
① IP address of device in explorer URL line.
Four functionality management menus: Configuration, Monitor, Diagnostics and
②
Maintenance
Configuration: For setting all system parameters relevant to proper operation of the
device.
Monitor: Displays a variety of statuses from the device and other device info that enable
system administrator to following up and check if the device is working properly.
Diagnostics: Includes tools to diagnose and troubleshoot networking issues
Maintenance: For restarting your device, returning to factory defaults and upgrading
your device.
③ Main bar: consists of the following buttons:
Show help: online help specific to the displayed dynamic configuration screen.
Logout: User can end access to device web site.
Home: Access to device front panel.
SyncCenter: Control center of system synchronization interfaces and timing signal
and their distribution.
PTP: Manage PTP clock instances
Save running config: After
16