Mld Snooping Groups Information; Mld Sfm Information - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Status

MLD Snooping Groups Information

Entries in the MLD Group Table are shown on this section
Navigating the MLD Group Table.
Each page shows up to 99 entries from the MLD Group table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD
Group Table. Clicking the Refresh button will update the displayed table starting from that or the
closest next MLD Group Table match. In addition, the two input fields will – upon a Refresh button
click – assume the value of the first displayed entry, allowing for continuous refresh with the same
start address
The >> will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the << button to
start over.
Web GUI: Configuration > IPMC > MLD Snooping > Group Information
Figure 4-151: MLD Snooping Groups Information.
Table 4-145: MLD Snooping Groups Information Parameters
VLAN ID
Groups
Port Members

MLD SFM Information

Entries in the MLD SFM Information Table are shown on this page. The MLD SFM (Source-Filtered
Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This
table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong
to the same group are treated as single entry.
Navigating the MLD SFM Information Table
Each page shows up to 99 entries from the MLD SFM Information table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the MLD SFM Information Table.
209
Indicate whether specific port is a router port or not.
VLAN ID of the group.
Group address of the group displayed.
Ports under this group.