FibroLAN Falcon-RX/812/G/A User Manual page 80

Falcon R-Class | User Guide
By clicking on any port number in the above table, you may access another display, which will allow
configuring the QoS Egress Scheduler and Shapers for a specific port.
Web GUI: Configuration > QoS > Port Shaping
Figure 4-53: QoS Egress Port Scheduler and Shapers Configuration
Table 4-50: QoS Egress Port Scheduler & Shapers Parameters
Scheduler Mode Controls whether the scheduler mode is Strict Priority or Weighted on
this switch port.
Queue Shaper Controls whether the queue shaper is enabled for this queue on this
Enable switch port.
Queue Shaper Rate Controls the rate for the queue shaper. The default value is 500. This
value is restricted to
restricted to 1-
Queue Shaper Unit Controls the unit of measure for the queue shaper rate as kbps or Mbps.
The default value is kbps.
Queue Shaper The rate type of the queue shaper. The allowed values are:
•
Rate-type
•
Queue Scheduler Controls whether the queue has cut-through enabled.
Cut-through
Queue Scheduler Controls whether the queue has frame preemption enabled.
Preemption
80
-1000000 when the Unit is kbps, and it is
100
when the Unit is Mbps.
3300
Line: Specify that this shaper operates online rate.
Data: Specify that this shaper operates on data rate.