Time Attributes Configuration; Time Settings Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 4-93: Holdover Configuration parameters
Holdover Configuration
Timeout [min] Set the SyncCenter holdover duration in minutes for available states:
Mode Three options supported: Fast Locked, Keep offset, Freq adjust.
jam-sync offset Default setting is 0
Frequency Default setting is 100 ppb
adjust limit [

Time Attributes Configuration

Figure 4-99: Time Attributes Configuration
Table 4-94: Time Attributes Configuration parameters
Holdover Configuration
UTC to TAI Value in seconds of difference between UTC and TAI
Mode Options supported: Manual, Auto.
UTC Time Display the current UTC time of the SyncCenter

Time Settings Configuration

Figure 4-100: Time Settings Configuration
Table 4-95: Time Settings Configuration parameters
Holdover Configuration
Time Settings Allows to set the system date and time manually
Save to config Option to save the manual settings to running configuration file
Set Set the selected date and time values. This will not Apply nor Save the values to
configuration. These actions are done separately.
154
•
In-spec timer, when expired system mode changes to Out-of-spec
•
Out-of-spec timer, when expired system mode changes to Free-running