Thermal Protection - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
When a port is powered down for saving power, outgoing traffic is stored in a buffer until the port is
powered up again. Because there are some overheads in turning the port down and up, more power
can be saved if the traffic can be buffered up until a large burst of traffic can be transmitted. Buffering
traffic will give some latency in the traffic.
Note: For Port Power Savings refer to "Port Power Savings Configuration"
For Port Power Savings Status, refer to .
"Port Power Saving Status"

Thermal Protection

For Thermal Protection Configuration, refer to "Thermal Protection Configuration".
For Thermal Protection Status, refer to "Thermal Protection Status".
40