FibroLAN Falcon-RX/812/G/A User Manual page 124

Falcon R-Class | User Guide
Last Supplicant/Client Info
Name IEEE Name
MAC
dot1xAuthLastEapolFrameSource The MAC address of the last supplicant/client.
Address
VLAN ID -
Version dot1xAuthLastEapolFrameVersion
Identity -
Selected Counters
The Selected Counters table is visible when the port is in one of the following administrative
states:
•
Multi 802.1X
•
MAC-based Auth.
The table is identical to and is placed next to the above Port Counters table and will be empty if
no MAC address is currently selected. To populate the table, select one of the attached MAC
Addresses from the table below.
Attached MAC Addresses
Identity
MAC Address
VLAN ID
124
Shows the identity of the supplicant, as received in the Response
Identity EAPOL frame. Clicking the link causes the supplicant's EAPOL
and Backend Server counters to be shown in the Selected Counters
table. If no supplicants are attached, it shows No supplicants attached.
This column is not available for MAC-based Auth.
For Multi 802.1X, this column holds the MAC address of the attached
supplicant.
For MAC-based Auth., this column holds the MAC address of the
attached client.
Clicking the link causes the client's Backend Server counters to be
shown in the Selected Counters table. If no clients are attached, it
shows No clients attached.
This column holds the VLAN ID that the corresponding client is currently
secured through the Port Security module
Description
The VLAN ID on which the last frame from the last
supplicant/client was received.
802.1X-based: The protocol version number
carried in the most recently received EAPOL
frame.
MAC-based: Not applicable.
802.1X-based: The
identity) carried in the most recently received
Response Identity EAPOL frame.
MAC-based: Not applicable.
username (supplicant