FibroLAN Falcon-RX/812/G/A User Manual page 123

Falcon R-Class | User Guide
Other
Rx
Requests
Auth.
Rx
Successes
Auth.
Rx
Failures
Tx Responses
Last Supplicant/ Client Info
Last Supplicant/Client Info
Information about the last supplicant/client that attempted to authenticate. This information is
available for the following administrative states: (Refer to section 4.9.2.2 Port Configuration)
•
Port-based 802.1X
•
Single 802.1X
•
Multi 802.1X
•
MAC-based Auth
123
Counts all Access Challenges received from the
backend server for this port (left-most table) or
client (right-most table).
802.1X-based:
Counts the number of times that the switch sends
dot1xAuthBackend an EAP Request packet following the first to the
OtherRequestsToSu supplicant. Indicates that the backend server
pplicant chose
MAC-based:
Not applicable.
802.1X-
Counts the number of times that the switch
dot1xAuthBackend
receives a success indication. Indicates that the
AuthSuccesses
supplicant/client has successfully authenticated
to the backend server.
802.1X-
Counts the number of times that the switch
dot1xAuthBackend
receives a failure message. This indicates that the
AuthFails
supplicant/client has not authenticated to the
backend server.
802.1X-based:
Counts the number of times that the switch
attempts to send a supplicant's first response
packet to the backend server. Indicates the switch
attempted communication with the backend
dot1xAuthBackend
server. Possible retransmissions are not counted.
Responses
MAC-based:
Counts all the backend server packets sent from
the switch towards the backend server for a given
port (left-most table) or client (right-most table).
Possible retransmissions are not counted.
an EAP-method.
and MAC-based:
and MAC-based: