General Introduction; System Information - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
5 Management

5.1 General Introduction

The R Class series can be remotely or locally managed via a variety of mechanisms/platforms with
virtually no integration effort:
1. IP Based (in-band):
2. Console (RJ-45):

System Information

This section provides general information about the system.
Web GUI: Monitor > System > Information
Figure 5-1: System Information
Table 5-1: System Information Parameters
Contact
Name
Location
MAC Address
Chip ID
System Date
System Uptime
257
SNMP (v1/v2/v3), Telnet (CLI), SSH, Web – HTTP/HTTPS.
RS-232 (115200Bd) CLI (Cisco like).
The system contact configured in Configuration | System |
Information | System Contact.
The system name configured in Configuration | System | Information
| System Name.
The system location configured in Configuration | System |
Information | System Location
The MAC Address of this switch.
The Chip ID of this switch.
The current (GMT) system time and date. The system time is obtained
through the Timing server running on the switch, if any.
The period of time the device has been operational.