FibroLAN Falcon-RX/812/G/A User Manual page 131

Falcon R-Class | User Guide
Action Specify the action to take with a frame that hits this ACE.
•
•
•
Rate Limiter Select whether the rate limiter in number of base units. The allowed range
is 1 to 16. Disabled indicates that, the rate limiter operation is disabled
EVC Policer Select whether EVC policer is enabled or disabled. The default value is
Disabled. Note that the ACL rate limiter and EVC policer cannot both be
enabled.
Mirror Specify the mirror operation of this port. Frames matching the ACE are
mirrored to the destination mirror port. The rate limiter will not affect
frames on the mirror port. The allowed values are:
•
•
The default value is "Disabled".
Logging Specify the logging operation of the ACE. Notice that the logging message
does not include the 4 bytes CRC information. The allowed values are:
•
•
Note: The logging feature only works when the packet length is less than
1518(without VLAN tags) and the System Log memory size and logging
rate is limited
Shutdown Specify the port shut down operation of the ACE. The allowed values are:
•
•
Note: The shutdown feature only works when the packet length is less than
1518(without VLAN tags).
Counter The counter indicates the number of times the ACE was hit by a frame.
131
Permit: The frame that hits this ACE is granted permission for the ACE
operation.
Deny: The frame that hits this ACE is dropped.
Filter: Frames matching the ACE are filtered.
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
Enabled: Frames matching the ACE are stored in the System Log.
Disabled: Frames matching the ACE are not logged.
Enabled: If a frame matches the ACE, the ingress port will be disabled.
Disabled: Port shut down is disabled for the ACE.