Falcon R-Class | User Guide
Hardware
Filter/Switch
MLD Snooping Configuration
This section provides MLD Snooping related configuration.
MLD is an acronym for Multicast Listener Discovery for Ipv6. MLD is used by Ipv6 routers to discover
multicast listeners on a directly attached link, much as IGMP is used in Ipv4. The protocol is
embedded in ICMPv6 instead of using a separate protocol.
Web GUI: Configuration > IPMC > MLD Snooping > Basic Configuration
Figure 4-147: MLD Snooping Configurations
Table 4-141: MLD Snooping Configurations Parameters
MLD Snooping Configuration
Snooping Enabled
204
Indicates whether data plane destined to the specific group address from the
source Ipv4 address could be handled by chip or not.
Enables the Global MLD Snooping.