FibroLAN Falcon-RX/812/G/A User Manual page 188

Falcon R-Class | User Guide
Web GUI: Configuration > Spanning Tree > MSTI Mapping
Figure 4-133: MSTI Configuration
Table 4-127: MSTI Configuration Parameters
Configuration Identification
Configuration
Name
Configuration
Revision
MSTI Mapping
MSTI The bridge instance.
The CIST is not available for explicit mapping, as it will receive the VLANs not
explicitly mapped.
VLANs Mapped The list of VLAN's mapped to the MSTI.
The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or
a range (xx-yy), each of which must be separated with comma and/or space.
A
An unused MSTI should just be left empty. (I.e., not having any VLANs mapped
to it.) Example: 2,5,20-40.
188
The name identifying the VLAN to MSTI mapping.
Bridges must share the name and revision (see below), as well as the VLAN-to-
MSTI mapping configuration in order to share spanning trees for MSTI's. (Intra-
region). The name is at most 32 characters
The revision of the MSTI configuration named above.
This must be an integer between 0 and 65535.
VLAN can only be mapped to one MSTI.