Ptp Slave Table - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Parent Port ID Clock identity for the parent clock, if the local clock is not a slave, the value
is the clocks own id.
Port Port Id for the parent master port.
PStat Parents Stats (always false).
Var It is observed parent offset scaled log variance.
Rate Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset
compared to the master. (unit = ns per s).
GrandMaster ID Clock identity for the grand master clock, if the local clock is not a slave, the
value is the clocks own id.
GrandMaster The clock quality announced by the grand master (See description of Clock
Clock Quality Default DataSet:Clock Quality).
Pri1 Clock priority 1 announced by the grand master.
Pri2 Clock priority 2 announced by the grand master.
Tx Enabled Green – Indicates Master is enabled for PTP transmission.
Red – Indicates Master is NOT enabled for PTP transmission.
UtcOffset In systems whose epoch is UTC, it is the offset between TAI and UTC.
Valid When true, the value of currentUtcOffset is valid.
leap59 When true, this field indicates that last minute of the current UTC day has
only 59 seconds.
leap61 When true, this field indicates that last minute of the current UTC day has 61
seconds.
Time Trac True if the timescale and the value of currentUtcOffset are traceable to a
primary reference.
Freq Trac True if the frequency determining the timescale is traceable to a primary
reference.
ptp Time Scale True if the clock timescale of the grandmaster clock and false otherwise.
Time Source The source of time used by the grandmaster clock.
Buttons PTP Config: Click on it to go to PTP Configuration display.
Sync Center config: Click on it to go to SyncCenter config. Display.

PTP Slave Table

This section shows the PTP Slave Table (Relevant for Unicast profiles only).
Web GUI: Monitor > Timing > PTP > Slave Table
Figure 4-125: PTP Slave Table
174