FibroLAN Falcon-RX/812/G/A User Manual page 129

Falcon R-Class | User Guide
Port Redirect Indicates the port redirect operation of the ACE. Frames matching the ACE are
redirected to the port number. The allowed values are Disabled or a specific
port number. When Disabled is displayed, the port redirect operation is
disabled.
Mirror Specify the mirror operation of this port. Frames matching the ACE are
mirrored to the destination mirror port. The allowed values are:
•
•
The default value is "Disabled.
Counter The counter indicates the number of times the ACE was hit by a frame.
Modification
Button
checking this box, you access additional displays (ACE configuration, VLAN
Parameters).
Note: Refer to the Alphabetic Glossary of Terms for explanation of all underlined terms in the above
section.
By clicking on the : The lowest plus sign adds a new entry at the bottom of the ACE listings. Refer
to next page.
4.8.2.10 ACE Configuration
Configure an ACE (Access Control Entry) on this section. An ACE consists of several parameters. These
parameters vary according to the frame type that you select. First select the ingress port for the ACE,
and then select the frame type. Different parameter options are displayed depending on the frame
type selected.
A frame that hits this ACE matches the configuration that is defined here.
129
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
: The lowest plus sign adds a new entry at the bottom of the ACE listings. By