Qos Port Dscp Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 4-51: QoS Egress Port Tag Remarking Parameters
Port The logical
Click on the port number to configure the tag remarking. See example in picture
above for port 6
Mode Shows the tag remarking mode for this port.
•
Classified: Use classified PCP/DEI values.
•
Default: Use default PCP/DEI values.
•
Mapped: Use mapped versions of QoS class and DP level.

Qos Port DSCP Configuration

This section allows you to configure the basic QoS Port DSCP configuration settings for all switch
ports. DSCP (Differentiated Services Code Point) is a field in the header of
classification purposes.
Web GUI: Configuration > QoS > Port Tag Remarking
Figure 4-56: QoS Port DSCP Configuration
82
port for the settings contained in the
IP packets for packet
same row.