FibroLAN Falcon-RX/812/G/A User Manual page 151

Falcon R-Class | User Guide
Figure 4-95: SyncCenter configuration page
Table 4-89: Sync Source parameters
Sync Source
ID Indicates the sync source identification number.
Ena Enable or disable the sync source.
Type Select the type of sync source. Available options depend on model and may
include: SyncE, PTP, GNSS, TDM and External.
Port Select the port or instance of the selected sync source type. For example: for SyncE
this will be Ethernet port numbers, for PTP the clock instance number, etc.
State The status of the sync source. This indicator displays the following states:
•
•
•
•
The indicator is also a hyperlink to the detailed source's page.
Quality Indicates the sync source's current (clock) quality (QL) as received from the source
(Current) (e.g., via SSM). When there is no quality indication received from the source, a
default quality value is shown with parentheses.
Quality select the threshold quality, for which the source will be qualified as valid.
(Qualified)
151
Green - The source provides a valid reference clock.
Red – indicates failure of the source.
Orange – Source quality is unqualified
Grey - When a source is disabled or not applicable, indicator will be.