FibroLAN Falcon-RX/812/G/A User Manual page 254

Falcon R-Class | User Guide
Table 4-174: sFlow Statistics
Receiver Statistics
Owner.
IP Address / Hostname
Timeout
Tx Successes
Tx Errors
Flow Sample
Counter Samples
Port Configuration
Port
Flow Samples
Counter Samples
254
This field shows the current owner of the sFlow configuration.
It assumes one of three values as follows:
• If sFlow is currently unconfigured /unclaimed, Owner contains
<None>.
• If sFlow is currently configured through Web or CLI, Owner
contains <Configured through local management>.
• If sFlow is currently configured through SNMP, Owner contains a
string identifying the sFlow receiver.
The IP address
or hostname
The number of seconds remaining before sampling stops and the
current sFlow owner is released.
The number of UDP datagrams successfully sent to the sFlow
receiver.
The number of UDP datagrams that has failed transmission. The
most common source of errors is invalid sFlow receiver IP
configuration.
To diagnose, paste the receiver's IP address
Web page (Diagnostics → Ping
The total number of flow samples sent to the sFlow receiver.
The total number of counter samples sent to the sFlow receiver.
The port number for which the following statistics applies.
The number of flow samples sent to the sFlow receiver originating from
this port.
The total number of counter samples sent to the sFlow receiver
originating from this port.
of the sFlow receiver
/hostname
Ping6).
/
/hostname
into the Ping