Time; Sync Output - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 4-97: General Status parameters
State
Locked to
Offset from GNSS
(nSec)
Time in State
Time in current
output quality
WTR Active
WTR Time
Clear button

Time

UTC to TAI Status
UTC Time

Sync Output

Figure 4-104: Sync Output Status
Table 4-98: Sync Output parameters
Sync Output
Output
Status
Quality
Buttons
157
Shows the current system's overall synchronization state (e.g.,
Locked). The state is also evident in the color of the SyncCenter main
block diagram as described in Table 4-90 and Table 4-96
Indicates the sync source (type and port/instance) the system is
currently locked to (e.g., SyncE 2).
Currently N/A.
The time that has passed since the last system sync state change.
The time that has passed since the last output QL change.
Indicates the active status of the WTR timer. Green means timer is not
running (i.e., system stable), Amber means timer is currently running,
and Grey indicates WTR is disabled.
Indicates the time left before the WTR timer expires (when running).
Allows resetting of the WTR timer when running (i.e., skip the WTR
period).
Value in seconds of difference between UTC and TAI
Display the current UTC time of the SyncCenter
Indicates the type of output (e.g., SyncE, PTP or TDM).
Indicates the clock output which is used to synchronize the
functional block in 'Output'.
Indicates the clock quality distributed on this type of output.
Configuration: Direct link to the
Statistics: Direct link to the Sync Center Statistics page
SyncCenter configuration page.