Vlan Translation - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Web GUI: Monitor > VLANs > Membership
Figure 4-29: VLAN Membership Status for Combined Users
Table 4-26: VLAN Membership Status for Combined users Parameters
VLAN ID
VLAN Name
Port Members
Buttons

VLAN Translation

VLAN Translation allows the user to swap existing VID on the port ingress to a different VID. The
translation is done per group of ports. By default, each port is assigned as an independent group.
4.6.3.1 VLAN Translation Port Configuration
This section allows you to configure switch Ports to use a given VLAN Translation Mapping Group.
This will enable all VLAN Translation mappings of that group (if any) on the selected switch port.
53
VLAN ID for which the Port members are displayed.
VLAN Name for which the Port members are displayed.
A row of check boxes for each port is displayed for each VLAN ID. If a port is
included in a VLAN, the following image
If a port is in the forbidden port list, an image
If a port is in the forbidden port list and at the same time attempted included
in the VLAN, the following image will be displayed:
a member of the VLAN in this case.
dropdown list
will be displayed.
will be displayed.
. The port will not be
: Select VLAN Users from this