FibroLAN Falcon-RX/812/G/A User Manual page 94

Falcon R-Class | User Guide
Table 4-58: Port Storm Policer Configuration Parameters
Port The port number for which the configuration below applies.
Enable Enable or disable the storm policer for this switch port.
Rate Controls the rate for the port storm policer. This value is restricted to 10-
13128147 when Unit is fps or kbps, and 1-13128 when Unit is kfps or Mbps. The
rate is internally rounded up to the nearest value supported by the port storm
policer. Supported rates are divisible by 10 fps or 25 kbps.
Unit Controls the unit of measure for the port storm policer rate as fps, kfps, kbps or
Mbps.
94