FibroLAN Falcon-RX/812/G/A User Manual page 172

Falcon R-Class | User Guide
Description User defined free text (64 characters)
Port List It shows the configured ports for the specified Clock Instance.
Buttons Instance number: Hit to access detailed Clock Instance Status page
PTP Config: Click on it to go to PTP Configuration display.
Sync Center config: Click on it to go to SyncCenter config. display
4.12.3.1 PTP Clock Instance Status
Web GUI: Monitor > Timing > PTP > Clocks > (Hit Clock Inst. Number)
Figure 4-124: PTP Clock Instance Status
Table 4-118: PTP Clock Instance Status Parameters
Clock Instance Indicates the Instance of a particular Clock Instance [0...3]
ClkDom HW Refers to Clock HW Domain
Domain
Device Type Indicates the Type of the Clock Instance. There are five Clock Types:
•
•
•
•
•
Profile Indicates the profile used by the clock.
PTP Time Shows the actual PTP time with nanosecond resolution.
Clock Adjust. Shows the actual clock adjustment method. The method depends on the
Method available hardware.
Ports Monitor Click to monitor the port data set for the ports assigned to this clock instance.
Page
172
Boundary – clock's Type is Ordinary-Boundary Clock.
Transparent (P2P) – Clock's Type is Peer to Peer Transparent Clock.
Transparent (E2E) – Clock's Type is End to End Transparent Clock
Master Only - Clock's e Type is Master Only.
Slave Only - Clock's Type is Slave Only.