FibroLAN Falcon-RX/812/G/A User Manual page 168

Falcon R-Class | User Guide
PTP Time Shows the actual PTP time with nanosecond resolution.
Clock Adjustment Shows the actual clock adjustment method. The method depends on the
Method available hardware.
Activate this button to synchronize the System Clock to PTP Time.
Synchronize to
System Clock
4.12.2.4 Clock Current DataSet
Figure 4-117: Clock Type and Profile
Table 4-111: Clock Type and Profile
stpRm Steps Removed: It is the number of PTP clocks traversed from the
grandmaster to the local slave clock.
Offset From Time difference between the master clock and the local slave clock,
Master measured in ns.
The mean propagation time for the link between the master and the local
Mean Path Delay
slave.
4.12.2.5 Clock Parent Data Set
The clock parent data set is defined in the IEEE 1588 standard. The parent data set is dynamic.
Figure 4-118: Clock Type and Profile
Table 4-112: Clock Type and Profile
Parent Port ID Clock identity for the parent clock, if the local clock is not a slave, the value
is the clocks own id.
Port Port Id for the parent master port.
PStat Parents Stats (always false).
Var It is observed parent offset scaled log variance.
Rate Observed Parent Clock Phase Change Rate. i.e., the slave clocks rate offset
compared to the master. (unit = ns per s).
Grand Master ID Clock identity for the grand master clock, if the local clock is not a slave, the
value is the clocks own id.
Grand Master The clock quality announced by the grand master (See description of Clock
Clock Quality Default DataSet:Clock Quality)
Pri1 Clock priority 1 announced by the grand master.
Pri2 Clock priority 2 announced by the grand master.
168