Ip Interfaces - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide

IP Interfaces

Web GUI: Configuration > System > IP
Figure 4-4: IPv4 / IPv6 Configuration
Table 4-3: IP Interfaces Parameters
Delete
VLAN
IPv4 DHCP Enabled
IPv4 DHCP Client
Identifier Type
IPv4 DHCP Client
Identifier IfMac
IPv4 DHCP Client
Identifier ASCII
IPv4 DHCP Client
Identifier HEX
IPv4 DHCP Hostname
IPv4 DHCP Fallback
Timeout
IPv4 DHCP Current Lease For DHCP interfaces with an active lease, this column shows the current
21
Select this option to delete an existing IP interface
The VLAN associated with the IP interface. Only ports in this VLAN will
be able to access the IP interface. This field is only available for input
when creating a new interface.
Enable the DHCPv4 client by checking this box. If this option is enabled,
the system will configure the IPv4 address and mask of the interface
using the DHCPv4 protocol. The DHCPv4 client will announce the
configured System Name as hostname to provide DNS lookup
This specified which of the three types below, i.e., IfMac, ASCII or HEX,
shall be used for the Client Identifier. See RFC-2132 section 9.14.
The interface name of DHCP client identifier. When DHCPv4 client is
enabled and the client identifier type is 'ifMac', the configured
interface's hardware MAC address will be used in the DHCP option 61
field.
The ASCII string of DHCP client identifier. When DHCPv4 client is
enabled and the client identifier type is 'ascii', the ASCII string will be
used in the DHCP option 61 field.
The hexadecimal string of DHCP client identifier. When DHCPv4 client
is enabled and the client identifier type 'hex', the hexadecimal value
will be used in the DHCP option 61 field.
The hostname of DHCP client. If DHCPv4 client is enabled, the
configured hostname will be used in the DHCP option 12 field. When
this value is empty string, the field use the configured system name
plus the latest three bytes of system MAC addresses as the hostname.
The number of seconds for trying to obtain a DHCP lease.
After this period expires, a configured IPv4 address will be used as IPv4
interface address. A value of zero disables the fallback mechanism,
such that DHCP will keep retrying until a valid lease is obtained. Legal
values are 0 to 4294967295 seconds.
interface address, as provided by the DHCP server.