Dhcp Server Pool Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Table 5-8: DHCP Server Excluded IP Configuration Parameters
Excluded IP Address
Configure excluded IP addresses.
Delete Delete Excluded Ip Address operation
IP Range Define the IP Range to be excluded. The first excluded IP must be smaller
than or equal to the second excluded IP. BUT, if the IP range contains only 1
excluded IP, then you can just input it to either one of the first and second
excluded IP or both
Buttons Add IP Range: Click to add anew exclude IP range.

DHCP Server Pool Configuration

This page manages DHCP pools. According to the DHCP pool, DHCP server will allocate IP address and
deliver configuration parameters to DHCP client.
Web GUI: Configuration > DHCP > Server > Pool
Figure 5-10: DHCP Server Pool Configuration
Table 5-9: DHCP Server Pool Configuration Parameters
Pool Setting
Add or delete pools.
Adding a pool and giving a name is to create a new pool with "default"
configuration.
If you want to configure all settings including type, IP subnet mask and lease
time, you can click the pool name to go into the configuration page.
Name Configure the pool name that accepts all printable characters, except white
space. If you want to configure the detail settings, you can click the pool name
to go into the configuration page.
Type Display which types of pool is:
•
•
IP Display network number of the DHCP address pool. If "-" is displayed, it means
not defined.
265
Network: the pool defines a pool of IP addresses to service more than one
DHCP client.
Host: the pool services for a specific DHCP client identified by client
identifier or hardware address. If "-" is displayed, it means not defined.