Msti Port Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
CIST Aggregated and Normal Port Configurations
BPDU Guard If enabled, causes the port to disable itself upon receiving valid BPDU's.
Contrary to the similar bridge setting, the port Edge status does not affect this
setting. A port entering error-disabled state due to this setting is subject to the
bridge Port Error Recovery setting as well, located at
Point to Point Controls whether the port connects to a point-to-point LAN rather than a
shared medium. This can be automatically determined or forced either true or
false. Transition to the forwarding state is faster for point-to-point LANs than
for shared media.

MSTI Port Configuration

This section allows the user to inspect the current STP MSTI port configurations, and possibly change
them as well.
A MSTI port is a virtual port, which is instantiated separately for each active CIST (physical) port for
each MSTI instance configured and applicable for the port. The MSTI instance must be selected
before displaying actual MSTI port configuration options.
This page contains MSTI port settings for physical and aggregated ports.
By clicking on Get we get the below display for the selected MSTI.
Web GUI: Configuration > Spanning Tree > MSTI Ports
Figure 4-136: MSTI Port Configuration
191
STP Bridge Setting