FibroLAN Falcon-RX/812/G/A User Manual page 126

Falcon R-Class | User Guide
Web GUI: Configuration > Security > Network > ACL > Ports
Figure 4-77: ACL Port Configuration
Table 4-73: ACL Port Configuration Parameters
Port The logical port for the settings contained in the same row.
Policy ID Select the policy to apply to this port. The allowed values are 0 through 255. The
default value is 0.
Action Select whether forwarding is permitted ("Permit") or denied ("Deny"). The
default value is Permit.
Rate Limiter ID Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16. The default value is Disabled.
Port Redirect Select which port frames are redirected on. The allowed values are Disabled or a
specific port number. The default value is Disabled.
Mirror Specify the mirror operation of this port. The allowed values are:
•
•
Logging Specify the logging operation of this port. The allowed values are:
•
•
126
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored. The default value is
Disabled.
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged. The default value is
"Disabled". Please note that the System Log memory size and logging rate is
limited.