Lldp Media Configuration - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
CDP TLV "Port ID" is mapped into the LLDP "Port ID" field.
CDP TLV "Version and Platform" is mapped into the LLDP "System Description"
field.
Both the CDP and LLDP supports "system capabilities", but the CDP capabilities
cover capabilities that are not part of the LLDP. These capabilities are shown as
"others" in the LLDP neighbors table. If all ports have CDP awareness disabled, the
switch forwards CDP frames received from neighbor devices. If at least one port
has CDP awareness enabled all CDP frames are terminated by the switch.
Notes:
When CDP awareness for a port is disabled the CDP information isn't removed
immediately but will be removed when the hold time is exceeded. CDP is an
acronym for Cisco Discovery Protocol.
Optional TLVs
TLV is an acronym for Type Length Value. A LLDP frame can contain multiple pieces of information.
Each of these pieces of information is known as TLV.
Port Descr Optional TLV: When checked the "port description" is included in LLDP information
transmitted.
Sys Name Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
Sys Descr Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
Sys Capa Optional TLV: When checked the "system capability" is included in LLDP
information transmitted.
Mgmt Addr Optional TLV: When checked the "management address" is included in LLDP
information transmitted.

LLDP Media Configuration

This section allows you to configure the LLDP-MED. This function applies to VoIP devices which
support LLDP-MED.
220