FibroLAN Falcon-RX/812/G/A User Manual page 72

Falcon R-Class | User Guide
Type
Hardware
Filter/Switch
Navigating the MVR SFM Information Table
Each page shows up to 99 entries from the MVR SFM Information table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the MVR SFM Information table. Clicking the Refresh button will update the
displayed table starting from that or the closest next MVR SFM Information Table match. In addition,
the two input fields will - upon a Refresh button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address. The >> will use the last entry of the
currently displayed table as a basis for the next lookup. When the end is reached the text "No more
entries" is shown in the displayed table. Use the << button to start over.
72
Indicates the Type. It can be either Allow or Deny.
Indicates whether data plane destined to the specific group address from the
source IPv4/IPv6 address could be handled by the chip or not.