Falcon R-Class | User Guide
4.20 RMON (Remote Network Monitoring)
RMON Statistics Configuration
Configure RMON Statistics table on this section. The entry index key is ID.
Web GUI: Configuration > RMON > Statistics
Figure 4-174: RMON Statistics Configuration
Table 4-166: RMON Statistics Configuration Parameters
Delete
ID
Data Source
RMON History Configuration
Configure RMON History table on this section. The entry index key is ID.
Web GUI: Configuration > RMON > History
Figure 4-175: RMON History Configuration
Table 4-167: RMON History Configuration Parameters
Delete
ID
Data Source
Interval
Buckets
244
Check to delete the entry. It will be deleted during the next save.
Indicates the index of the entry. The range is from 1 to 65535.
Indicates the port ID which wants to be monitored. If in stacking switch,
the value must add 1000000*(switch ID-1), for example, if the port is
switch 3 port 5, the value is 20000005.
Check to delete the entry. It will be deleted during the next save.
Indicates the index of the entry. The range is from 1 to 65535.
Indicates the port ID which must be monitored. If in stacking switch, the
value must add 1000000*(switch ID-1), for example, if the port is switch
3 port 5, the value is 2000005
Indicates the interval in seconds for sampling the history statistics data.
The range is from 1 to 3600, default value is 1800 seconds
Indicates the maximum data entries associated this History control
entry stored in RMON. The range is from 1 to 3600. Default value is 50.