Monitoring The Mac Address Table; Navigating The Mac Table - FibroLAN Falcon-RX/812/G/A User Manual

Falcon R-Class | User Guide
Static MAC Table Configuration
Static MAC Table
Configuration

Monitoring the MAC Address Table

Entries in the MAC Table are shown in the below figure. The MAC Table contains up to 32768 entries,
and is sorted first by VLAN ID, then by MAC address.
Web GUI: Monitor > MAC Table
Figure 4-24: Monitoring MAC Address Table

Navigating the MAC Table

Each page shows up to 999 entries from the MAC table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the MAC Table. The first displayed will be the one with the lowest VLAN ID and the
lowest MAC address found in the MAC Table.
43
The static entries in the MAC table are shown in this table.
The static MAC table can contain up to a maximum 64 entries.
The MAC table is sorted first by VLAN ID and then by MAC address.
Delete: Check to delete the entry. It will be deleted during the next save.
VLAN ID: The VLAN ID for the entry.
MAC Address: The MAC address for the entry.
Port Members: Checkmarks indicate which ports are members of the
entry. Check or uncheck as needed to modify the entry.
Add a new static entry: Click to Add New Static Entry to add a new entry
to the static MAC table. Specify the VLAN ID, MAC address, and port
members for the new entry. Click Save.