FibroLAN Falcon-RX/812/G/A User Manual page 71

Falcon R-Class | User Guide
Table 4-42: MVR Channels (Group) Information parameters
MVR Channels (Groups) Information Table
VLAN ID
Group
Port Members
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the MVR Channels (Groups) Information Table.
VLAN
The "Start from
the MVR Channels (Groups) Information Table. Clicking the Refresh button will update the displayed
table starting from that or the closest next MVR Channels (Groups) Information Table match
In addition, the two input fields will - upon a Refresh button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address.
The >> will use the last entry of the currently displayed table as a basis for the next lookup. When the
end is reached the text "No more entries" is shown in the displayed table.
Use the << button to start over.
4.6.8.6 MVR SFM Information
Web GUI: Monitor > MVR > MVR SFM Information
Figure 4-46: MVR SFM Information display
Table 4-43: MVR SFM Information parameters
MVR SFM) Information Table
ID VLAN
Group
Port
Mode
Source Address
71
VLAN ID of the group
Group address of the group displayed.
Ports under this group.
", and "Group Address" input fields allow the user to select the starting point in
VLAN ID of the group.
Group address of the group displayed.
Switch port number.
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
IP Address of the source. Currently, the maximum number of IP source address
for filtering (per group) is 8. When there is no source filtering address, the text
"None" is shown in the Source Address field.