Table of Contents
Advertisement
Setting the Built-in Speaker (Beep Sound)
The 4287A is provided with a built-in speaker for emitting beep sounds. The beep sounds
serve two functions as shown in Table 11-1.
Table 11-1
4287A beep functions
Type
Completion beep
Warning beep
Turning the completion beep ON or OFF
The following procedure is used to turn the completion beep ON or OFF.
NOTE
For how to perform the instruction "press the key (softkey) in the softkey menu"
mentioned in the procedure, see "13. Softkeys" on page 87.
Step 1. Press the
Step 2. Press the
menu.
Step 3. Press the
(the setting toggles with each press of the button).
Softkey Label
BEEP DONE [ON]
BEEP DONE [OFF]
NOTE
Pressing the
hear the completion beep to test its operation.
Turning the warning beep ON or OFF
The following procedure is used to turn the warning beep ON or OFF.
NOTE
For how to perform the instruction "press the key (softkey) in the softkey menu"
mentioned in the procedure, see "13. Softkeys" on page 87.
Step 1. Press the
Chapter 11
Setting and Using the Control and Management Facilities
key on the front panel to display the System softkey menu.
[System]
key in the softkey menu to display the BEEPER MENU softkey
BEEPER MENU
key in the softkey menu to turn the completion beep ON or OFF
BEEP DONE [ ]
key in the BEEPER MENU softkey menu allows you to
PLAY BEEP DONE
key on the front panel to display the System softkey menu.
[System]
Setting the Built-in Speaker (Beep Sound)
Function
Beep sound heard when saving of calibration data or
measurement data is completed.
Beep sound heard when a warning message is
displayed or when the result of the BIN sort function
(comparator) is "pass" or "fail."
Completion Beep Setting
ON
OFF
233
Advertisement
Table of Contents
