Table of Contents
Advertisement
Setting and Using the Control and Management Facilities
Setting the Built-in Speaker (Beep Sound)
Step 2. Press the
menu.
Step 3. Press the
(the setting toggles with each press of the button).
NOTE
Pressing the
hear the completion beep to test its operation.
Switching the beep sound that indicates the BIN sort function result
(Pass or Fail)
The following procedure is used to set whether the beep sound indicates that the BIN sort
function is "Pass" (entered in good BIN) or "Fail" (not entered in good BIN).
NOTE
For how to perform the instruction "press the key (softkey) in the softkey menu"
mentioned in the procedure, see "13. Softkeys" on page 87.
Step 1. Press the
Step 2. Press the
menu.
Step 3. Press the
sounding the beep (Pass or Fail) (the setting toggles with each press of the button).
NOTE
Turning ON/OFF the beep sound for the BIN sort results is set by the procedure described
in "Turning the warning beep ON or OFF" on page 233.
234
BEEPER MENU
BEEP WARN [ ]
Softkey Label
BEEP WARN [ON]
BEEP WARN [OFF]
PLAY BEEP WARN
key on the front panel to display the System softkey menu.
[System]
BEEPER MENU
BEEP COMPARATOR [ ]
Softkey Label
BEEP COMPARATOR [FAIL]
BEEP COMPARATOR [PASS]
key in the softkey menu to display the BEEPER MENU softkey
key in the softkey menu to turn the warning beep ON or OFF
Warning Beep Setting
ON
OFF
key in the BEEPER MENU softkey menu allows you to
key in the softkey menu to display the BEEPER MENU softkey
key in the softkey menu to switch the condition for
Beep Setting According to BIN Sort Result
Beep sounds in case of Fail (not entered in
good BIN).
Beep sounds in case of Pass (entered in good
BIN).
Chapter 11
Advertisement
Table of Contents
