Compensation Kit Setup Display - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Function Overview
Names and Functions of Display Areas on the LCD Display

Compensation kit setup display

When no dialog box is shown, the compensation kit setup display (Figure 4-9) can be
displayed by pressing the [Setup View] key the required number of times.
Figure 4-9 Compensation kit setup display
1. Compensation kit setup tab
When the "COMPEN KIT" tab is displayed in front of the other three tabs, the screen
shows the compensation kit setup display. If another setup display appears, click this tab
with the mouse to get the compensation kit setup display. (The same operation can be done
with the "View" menu in the menu bar.)
2. Compensation kit selection
You can choose whether to use the values predetermined for the 7-mm compensation kit
(default) or user-defined values as a compensation kit definition.
Before selecting "Default," all compensation kit values should have been entered; the user
is not allowed to change the definition.
If you select "User Defined," you can freely enter the values for the compensation kit
definition. If you check (√) "Fixed Model," enter the definition for measurement point
number 1, which is then automatically applied to the other measurement point numbers.
3. Measurement point number/measurement frequency
Displays the measurement point (measurement point number and measurement frequency)
in the selected measurement point table.
Chapter 4 95