Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 289

Step 1. Press the
clock.
Step 2. Press the
Step 3. Press the
the cursor in the softkey label area in the right side of the screen to the
key.
Step 4. Press the
The Setting Date and Time dialog box (Figure A-3) appears.
Figure A-3 Setting Date and Time dialog box
2. Selecting the time zone and setting the automatic daylight saving time adjustment
Step 1. Press the
cursor in the dialog box to the Time Zone box.
Step 2. Press the
the time zone.
Step 3. Press the
If an area where daylight saving time is implemented was selected in Step 2, the cursor
moves to the "Automatically adjust clock for daylight saving changes" setting area. In this
case, perform the following steps to execute the setting for automatic adjustment for
daylight saving time before proceeding to "3. Setting the date".
a. Press the
daylight saving time ON or OFF (the setting toggles with each press of the button).
Check box
√
{blank field}
b. Press the
When an area where daylight saving time is not implemented was selected in Step 2, the
cursor moves to the Date box, proceeding to "3. Setting the date".
Appendix A
key on the front panel to place the 4287A in the mode for presetting the
[Preset]
[System] key on the front panel to display the System softkey menu.
key or key on the front panel the required number of times to move
key on the front panel.
key or key on the front panel the required number of times to move the
key or key on the front panel the required number of times to select
key on the front panel once.
key on the front panel to switch the function for automatic adjustment for
key on the front panel once to move the cursor to the Date box.
Automatic adjustment for daylight saving time
On
Off
Manual Changes
Manual Changes
SET DATE & TIME
289