Table of Contents
Advertisement
4287A Documentation Map
The following manuals are available for the 4287A.
•
•
Software Installed
The Windows operating system installed in this machine is customized for more effective
operation, and has different functions that are not part of the Windows operating system for
ordinary PCs (personal computers). Therefore, do not attempt to use the system in ways
other than those described in this manual or to install Windows-based software (including
anti-virus software) for ordinary PCs as doing so may cause malfunctions.
Also note the followings.
•
•
Agilent Technologies will not be held liable for any failure or damage arising from
negligence regarding these prohibitions and warnings.
NOTE
If the pre-installed software is damaged somehow, resulting in errant behavior by the
machine, perform a "system recovery".
Operation Manual (P/N: 04287-900x4)
Most of the basic information necessary for using the 4287A is provided in this
manual. It describes installation, preparation, measurement operation including
calibration, performances (specifications), and error messages. For GPIB
programming, see the Programming Manual.
Programming Manual (P/N: 04287-900x1)
The Programming Manual shows how to write and use BASIC program to control the
4287A.
Do not update the Windows operating system installed in this machine to the Windows
operating system for ordinary PCs. Doing so will cause malfunctions.
Do not allow any computer virus to infect the system. This machine has no virus check
function nor anti-virus software installed.
7
Advertisement
Table of Contents
