Measurement Terminal (At Test Head); Rear Panel Connectors - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Specifications and Supplemental Performance Characteristics
LAN Interface
Standard conformity
Protocol
Functions

Measurement terminal (at Test Head)

Connector type

Rear panel connectors

External Reference Signal Input Connector
Frequency
Level
Input impedance
Connector type
Internal Reference Signal Output Connector
Frequency
Uncertainty of frequency
Level
Output impedance
Connector type
External Trigger Input Connector
Level
Pulse width (Tp)
Polarity
Connector type
Chapter 12
Measurement Support Functions
10 Base-T or 100 Base-TX (automatically switched),
Ethertwist, RJ45 connector
TCP/IP
Telnet, FTP
3.5-mm (female) connector
(can be converted to 7-mm connector using the
3.5-mm-to-7-mm adapter)
10 MHz ±10 ppm (SPC)
≥ 0 dBm (SPC)
50 Ω (nominal)
BNC (female)
10 MHz (nominal)
Same as frequency uncertainty described in "Source
characteristics" on page 253
+2 dBm (nominal)
50 Ω (nominal)
BNC (female)
LOW threshold voltage: 0.5 V
HIGH threshold voltage: 2.1 V
Input level range: 0 to +5 V
≥ 2 μsec (SPC)
See Figure 12-8 for definition of Tp
Positive or Negative (selective)
BNC (female)
273