Table of Contents
Advertisement
Step 7. Use the number keys (
Step 8. Press the
indicated.
Step 9. Press the
5. Completing the setting
Step 1. Press the
Step 2. Press the
dialog box.
NOTE
To cancel setting of the date and time, press the
panel to move the cursor inside the dialog box to the
key. If the setting of the date and time is cancelled, the date and time set and valid before
you started to make the new setting will remain in effect.
6. Turning the date and time display On or Off
The set date and time can be displayed in the date/time display area in the lower-right area
of the measurement display.
Step 1. Press the
Step 2. Turn the rotary knob (
the
DATE & TIME [ ]
Step 3. Press the rotary knob (
with each press of the button).
Softkey indicator
DATE & TIME [LIVE]
DATE & TIME [STAMP]
DATE & TIME [OFF]
Miscellaneous Changes
The option system of the 4287A has changed since May 2003. Apply the following
changes.
New Option Number
700
Calibration Kit)
-
Appendix A
to
[0][1]
[9]
key on the front panel to move the cursor to the position where "AM/PM" is
[.]
key or
key on the front panel to select "AM" or "PM."
key on the front panel once to move the cursor to the
key on the front panel to complete the date and time setting and close the
[Display]
key on the front panel to show the Display softkey menu.
) on the front panel to move the cursor in the softkey menu to
key.
) to switch the date/time display ON or OFF (the setting toggles
(Agilent 16195B 7-mm
) on the front panel to enter the "second."
key or the
button and then press the
Cancel
Date/time display status
Display on (constantly updated)
Display on (display not updated)
Display off
Old Option Number
-
001 (Without Agilent 16195B 7-mm
Calibration Kit)
Manual Changes
Manual Changes
OK
button.
key on the front
Remark
*1
291
Advertisement
Table of Contents
