Manual Changes - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Manual Changes

Manual Changes
Manual Changes
To adapt this manual to your 4287A, refer to Table A-1 and Table A-2.
Table A-1 Manual Changes by Serial Number
Table A-2 Manual Changes by Firmware Version
Agilent Technologies uses a two-part, ten-character serial number that is stamped on the
serial number plate (Figure A-1). The first five characters are the serial prefix and the last
five digits are the suffix.
Figure A-1 Example of Serial Number Plate
284
Serial Number Prefix
JP1KG
JP1KG , M432
Version
1.1x
1.20
2.0x
Make Manual Changes
"Change 3"
"Change 4""Change 5""Change 6"
Make Manual Changes
"Change 1", "Change 2"
"Change 2"
"Change 4""Change 5""Change 6""Change 7"
Appendix A