Selection Of Test Fixture - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Selection of Test Fixture

When the DUT is attached and detached by manual operation, it is possible to use special
test fixtures. Select the appropriate test fixture by referring to Table 2-6. The options listed
in the table may not cover all conditions and characteristics, so please confirm detailed
specifications by referring to the appropriate accessory catalogs and operation manuals.
Table 2-6
NOTE
When a special test fixture is used, it is necessary to first attach the test head to the test
fixture stand (at this point, the test head's 3.5-mm terminal is converted to a 7-mm terminal
by using the 3.5-mm-to-7-mm adapter). For details on how to attach the test head to the test
fixture stand, see "Connecting the DUT when using a special test fixture" on page 31.
Chapter 2
Usable test fixtures
Test Fixture Frequency Range
16196A
16196B
16196C
16197A
16191A
16192A
16194A
*1.  indicates the direction of contact of the test fixture's electrode.
Components Size (SMD)
DC to 3 GHz
DC to 3 GHz
DC to 3 GHz
DC to 3 GHz
DC to 2 GHz
DC to 2 GHz
DC to 2 GHz
Installation Guide
Selection of Test Fixture
1608 mm/0603 inch
1005 mm/0402 inch
0603 mm/0201 inch
*1
*1
*1
*1
45