Follow these steps to set the deviation measurement mode.
Step 1. Press the
key in the measurement block to display the parameter setup softkey
[Prmtr]
menu in the list measurement display.
Step 2. Select the
SETUP DEVIATION
softkey menu.
Step 3. Select the desired parameter label (
and the deviation setup softkey menu for the selected label will appear.
Step 4. Press the
DEV MODE
each press of the button).
Softkey Label
DEV MODE [OFF]
DEV MODE [Deviation]
DEV MODE [% Dev.]
Step 5. Press the
key in the softkey menu, and enter the reference value when you select
CENTER
or
Deviation
% Dev.
Chapter 7
Executing Measurements and Displaying Results
Setting How the Instrument Displays Measurement Results
(Enabling/Disabling Deviation Measurement Mode)
key from the softkey menu to display the deviation setup
PRMTR-1 [ ]
to
key in the softkey menu to select the mode (the setting toggles with
Deviation measurement mode
OFF
ON (absolute deviation mode)
ON (percent deviation mode)
.
PRMTR-4 [ ]
) from the softkey menu,
165