Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 42

Installation Guide
Initial Registration of 4287A
Step 5. In the Network Identification Wizard dialog box (1/2), select the
assumes the following user has logged on to this computer
agt_instr
(Figure 2-21).
Figure 2-21 Network Identification Wizard dialog box (1/2)
Step 6. In the Network Identification Wizard dialog box (2/2), click the
initial registration of the 4287A (Figure 2-22). Then, the measurement display of the4287A
appears.
Figure 2-22 Network Identification Wizard dialog box (2/2)
42
is in the User Name box. If not, type in
Windows always
box and check that
agt_instr . Finally, click the
Finish button to finish the
Next> button
Chapter 2