Agilent Technologies Twelfth 4287A RF LCR Operation Manual page 232

Setting and Using the Control and Management Facilities
Configuring the Network
Step 5. The Identification Changes dialog box (Figure 11-6) appears. Enter the computer name in
the
Figure 11-6 Identification Changes dialog box
Step 6. The Network Identification dialog box (Figure 11-7) appears. Click the
Figure 11-7 Network Identification dialog box
Step 7. In the Identification Changes dialog box, click the
Step 8. In the System Properties dialog box, click the
Step 9. The System Settings Change dialog box (Figure 11-8) appears. Click the
restart the 4287A.
Figure 11-8 System Settings Change dialog box
NOTE
Until the 4287A is restarted, changed setting does not take effect.
232
Computer Name box (1 in Figure 11-6).
OK button (2 in Figure 11-6).
OK button (2 in Figure 11-5).
button.
OK
button to
Yes
Chapter 11