Table of Contents
Advertisement
Information on Maintenance
Cleaning this Instrument
Installing center conductor collet
Follow these steps to install the center conductor collet of the 7-mm connector.
Step 1. Insert the collet into the center conductor of the connector.
Step 2. Push the collet slowly as far as it will go.
Cleaning a Display Other than an LCD
To remove stains on parts other than the LCD, test ports, and other connectors/ports of the
instrument, wipe them gently with a soft cloth that is dry or wetted with a small amount of
water and wrung tightly.
332
Appendix G
Advertisement
Table of Contents
