Table of Contents
Advertisement
Storing and Retrieving 4287A Internal Information and File Management
Saving Setting Status
Saving Setting Status
The following procedure can be used to save any of several setting statuses of the 4287A
on a storage device (built-in nonvolatile memory or floppy disk).
Step 1. Set the 4287A to the setting status that you want to record.
Step 2. Press the
Save/Recall softkey menu.
Step 3. Press the
Figure 10-1
Save As dialog box for saving setting status
Step 4. Enter the filename in the File name box. If you want to enter the filename using the mouse,
see "Entering the Filename using the Mouse" on page 215.
NOTE
The user is not required to add the extension following the filename (the ".sta" filename
extension is automatically added).
NOTE
If the filename is specified as "autorec," the 4287A will automatically retrieve the
corresponding settings at the time the power is turned on. This "autorec" file can also be
automatically created at the time of calibration and compensation. For details, see the
explanation in Chapter 6, "Calibration and Compensation," on page 115.
Step 5. Press the
214
key on the instrument state block of the front panel to display the
[Save/Recall]
softkey to display the dialog box for saving the setting status.
SAVE STATE
key to save the setting status with the specified file name.
Save
Chapter 10
Advertisement
Table of Contents
